Air mattresses are fantastic for guests or camping trips, but waking up on a deflated mattress is no fun. If your Serta seems to be losing air, don’t worry! There are several common causes and easy ways to fix them.
Possible Reasons for Air Loss
- Tiny Punctures: Even the smallest holes can cause gradual air loss. Think along the lines of a stray pin, pet claws, or rough surfaces.
- Temperature Changes: Cold air makes the air inside the mattress contract, giving the impression of a leak. This is normal and should adjust as temperatures normalize.
- Stretching Material: New air mattresses take a few uses to fully stretch. Some initial deflating is normal.
- Valve Issues: The valve where you pump in air could be a little loose or damaged.
- Manufacturer Defects: While rare, a faulty seam or seal could be the culprit.
Troubleshooting Steps
- Find the Leak:
- Inflate the mattress fully.
- Mix dish soap and water in a spray bottle.
- Spray the solution over the mattress surface, seams, and valve. Look for bubbles, indicating a leak.
- Patch It:
- Many air mattresses come with patch kits. If not, a vinyl repair kit works.
- Clean the area around the leak, dry it completely, and apply the patch following the kit’s instructions.
- Check the Valve:
- Make sure it’s fully closed and tightened.
- A little soapy water around the valve can reveal a leak.
- Watch for Temperature Changes:
- If the room gets cold overnight, expect some natural deflation. Topping up air in the morning is normal in this case.
What if the Leak Can’t Be Found?
- Consider the Age: Air mattresses don’t last forever. If yours is old, it might be time for a replacement.
- Contact Serta: They may be able to help or offer a replacement if there’s a defect.
